Setting Up AQ DIRECT Mode
Your AQ SmartSpeaker
will work in AQ DIRECT mode straight out of the box. To do this, simply switch the speaker to AQ
DIRECT Mode by briefly pressing the Power/Mode button twice (from CONNECTED Mode). The Wi-Fi LED will turn orange.
Search for and connect to the “AQ Direct Mode XXXXXX” wireless network using the device you want to play audio from, and
you are ready to play. See the “Using Your AQ SmartSpeaker
”
page for details of how to do this from various Apps.
NOTE: When your iOS Device is connected to the
AQ SmartSpeaker
using AQ DIRECT Mode, you can still send and receive
text messages and phone calls, but you will be unable to access the internet.
When the AQ SmartSpeaker
is in AQ DIRECT mode, you can connect to it and stream audio without having to enter a
password, this means that anyone who is in range of your AQ SmartSpeaker
can use it to stream their audio.
This may be useful in certain situations, for example to allow your friends to easily use the speaker at a party, however it also
means that neighbours or other people in range of your speaker can also connect to your speaker if it is in AQ DIRECT Mode.
This page will show you how to add a basic password to the AQ SmartSpeaker
to stop other people connecting to it and
using it to play their music.
1. Ensure the AQ SmartSpeaker
is switched on, switch to AQ DIRECT mode (by pressing the Power/Mode button briefly
twice from CONNECTED mode, Wi-Fi LED goes Orange).
2. Connect to the “AQ Direct Mode XXXXXX” wireless network using your iOS Device, Mac or PC.
3. Open a web browser and enter 192.168.1.12 in the address bar, this will load the setup page.
4. Click “AQ Direct Settings” on the left to load the AQ DIRECT settings page.
5. Choose “WEP” from the Security drop-down box.
6. Enter a password into the Key/Passphrase box that appears. The password MUST be one of the following:
●
Exactly 5 characters in length (eg “abcde” or “a1b2c”)
●
A 10 digit hexadecimal value (eg “1234567890”)
NOTE: You can also manually assign the Wi-Fi Channel from this page. If you are unsure of the setting to use, you should
leave it set to “Auto”.
1. Once you are happy with the settings, Click Apply, and then click OK in the dialog box to confirm that you are happy with
the settings.
2. The settings are applied immediately, and you can close this window, You will need to reconnect to the “AQ Direct Mode
XXXXXX” wireless network using your new password before you can continue to use the speaker.
You can return to this page at any time and change or remove the password, provided you are connected to the “AQ Direct
Mode XXXXXX” wireless network.
To switch off the security, so you no longer need to use a password, select “none” from the “Security” drop-down, then click
Apply. You will then need to manually restart the speaker by pressing the reset button on the rear to complete this
change.
If you forget your password or mistyped it, and cannot connect, you will need to perform a system reset, which will clear all
your settings and restore the factory defaults. After a system reset, you will need to re-enter your connection settings for both
CONNECTED and AQ DIRECT Modes. To do this, press and hold the Volume Down, Power/Mode, and Volume Up buttons
for 10 seconds. Once the Reset is confirmed the Wi-Fi LED will turn orange, and then the AQ SmartSpeaker
will restart.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern